Ameda Platinum 17803, Инструкция по эксплуатации

Страница: 7 / 36

ENGLISH | 7
Setting Suction
• Pump starts at lowest suction setting (1% or approximately 30mmHg/4 .0kPa).
• Center nipple(s) in breast flange(s) and fill breast flange(s) with the breast(s) to create
an air seal. Keep upper body and bottles/flanges upright while pumping.
• Press to increase suction until reaching maximum comfort level.
• If discomfort is felt in nipple(s) or breast(s), press to decrease suction. If discomfort
is felt at all suction settings, turn pump off, insert a finger between breast(s) and breast
flange(s) to break suction, remove breast flange(s) from breast(s). Discontinue
pumping and contact a healthcare provider.
Setting Speed
• Pump starts at fastest speed (80 cpm).
• When milk flows (let-down), press
to decrease speed to help drain the breast
faster .
• When milk flow slows, press to increase speed to 60-80 cpm to help start
another let-down .
• Repeat as milk flow changes to pump more milk.
NOTE: If “Check Kit” appears in suction window, see Troubleshooting section, on page 8.
Using Timer
• Timer starts when pump is on. Timer displays pumping duration in minutes : seconds.
• Timer can be reset by pressing Timer Reset
button.
• Timer and pump automatically turn OFF after 60 minutes.
Turning Pump OFF
• When finished pumping, press and hold Power button to turn pump and timer
functions OFF.
suction speed
suction timer eed
suction
timer
suctio speed
Removing Ameda HygieniKit Milk Collection System from Breast(s)
• After pump is OFF, if necessary, insert a finger between breast(s) and breast flanges(s) to break suction.
• Remove breast flanges(s) from breast(s).
• Place bottles with milk in bottle holders.