AMEC WideLink R150GE, Руководство пользователя

Страница: 20 / 43

20
3 CONFIGURATION SETTINGS
3.1 Connecting the Receiver to your PC
To setup the Receiver connect the Receiver with the provided USB cable to the PC by
following below steps:

Select device from the drop-down list.

Click connect.

Once connected you may perform the following settings:
Configuration:

Baud Rate: RS-232 and NMEA Baud Rate settings.

Internal GPS: Enable/Disable internal GPS antenna.

Network: Network configuration (for additional details see Chapter xx).

Restore: Restore the device to factory default settings.
Diagnostics:

System Check: an overview on the Receiver version such as firmware and
others.

GPS Status: display all GPS Satellite details currently be seeing the Receiver.
(Note: a GPS antenna must be connected).

Data Log: display and store all Data created by the Receiver.
Figure 14 Select Device to Connect to WideLink R150GE
Connect
Select
Serial
Port