AMEC WideLink R150GE, Руководство пользователя

Страница: 18 / 43

18
2.7 Connecting to Power Supply
WideLink R150GE is designed with no physical On/Off switch and the Receiver will
automatically power up once connected to a power source.
The AIS Receiver requires a 12V or 24V DC power supply. The red wire, the black and
the white wire on the 3-pin cable are used to connect the power supply’s positive,
negative terminals and ground.
Figure 10 Power Supply Connection
2.8 USB Driver Installation
Your PC needs to install the USB driver in able to connect the AIS Receiver. Locate the
USB driver in the CD-ROM. Follow the instructions below to finish the installation.
Note: If PC could not recognize USB connection after a power restart, please reconnect
the USB connector.
Step 1: Open the USB Driver file and double click on USBDriverInstaller.exe to install the
driver. Please click on Install Drivers to continue.
Figure 11 USB Driver Installation (1)