AMEC AIS SART PLOMO-500, Руководство пользователя

Страница: 10 / 27

11
2.2 Wall bracket installation
When selecting a suitable mounting position consider the following points:
1.
Ease of access in an emergency, adjacent to the ship’s bridge wing exits ready for easy
access is recommended.
2. Position at least 1m from compass equipment.
3. Environmental protection, chose a protected location away from the extreme effects of the
weather and protected from powerful vessel wash down hoses.
4. Allow clearance above so that the AIS SART can be easily removed from the bulkhead
bracket.
Mounting procedure
Fix the mounting bracket to the ships wall using marine grade stainless steel screws or bolts;
length is dependent upon application. Bolts should be secured with either stainless steel locking
nuts or stainless-steel nuts with stainless steel shake proof washers.
The wall bracket is designed to mount on a flat surface using two fixing points. Two stainless
steel screws 20mm in length are included. Check that the rear side of the mounting surface is
clear and that the fixing screws will not penetrate something they should not. Offer the bracket
into the chosen position and mark through the mounting slots using the bracket as a template.
Drop the AIS SART carry bag rear pockets over the bracket hook section and push the bag
firmly into place.
Figure 5 Wall mounting