AME Intl. 14455, Инструкция по эксплуатации

Страница: 2 / 6

AME INTERNATIONAL WWW.AMEINTL.NET
14455 INSTRUCTION MANUAL
!WARNING!
FAILURE TO READ THESE WARNINGS MAY RESULT IN PROPERTY
DAMAGE AND OR PERSONAL INJURY.
Support load by appropriate means after lifting. Use as lifting device only. Do not exceed rated
capacity. Use only on hard level surface. Center load on the jack. DO NOT MODIFY JACK. Only
vehicle designated by the vehicle manufacturer.
MODEL LIFTING
CAPACITY
MIN.
HEIGHT
1ST STAGE
HEIGHT
NET
WEIGHT
GROSS
WEIGHT
PACKAGE
SIZE
AIR
PRESSURE
14455 20 TON 245 MM 475 MM 16 KG 18 KG 31x24x31
MM
0.7-1.0 MPa
It is the owner/operator responsibility to properly use and maintain this equipment and the legibility of all
warnings and instruction labels. Carefully read and understand the instructions and warnings in this
manual before operating this equipment. Keep this manual in a safe location for future reference.
Warranty of this unit will be void on any part if the unit subjected to misuse due to overloading, abuse,
is your responsibility to be aware of existing Federal, State and Local codes and regulations governing the
safe use and maintenance of this unit.
Prior to each use, visually inspect for leaking hydraulic oil, damaged, loose or missing parts. If jack is
worn or damaged remove from service and contact your nearest service center for repair.
Check oil level. With the jack in an upright position and the ram completely retracted, open the release
necessary with clean hydraulic jack oil.
Lubricate internal components. With the release valve open, manually pump the handle six times.
Purge the hydraulic system of air. During transit the unit may become “air-bound”, causing a spongy ram
action. To purge the system, close the release valve (turn clockwise). Manually pump the jack to full height.
Open the release valve and push down on the ram. Repeat these steps if necessary to completely purge
the system.
Keep the jack clean. Occasionally lubricate the handle socket pivot point, extension screw, release screw
thread, and air valve to prevent corrosion.
2