background image

LOADBINDER JACKS

Operational Manual

Reference # - 54215

Rev. - A

Date - 0711

777 Oakmont Lane, Ste. 800
Westmont, IL 60559
1.800.323.9114 • Outside U.S. 1.630.590.6990
www.simplexmechanicals.com

IMPORTANT - READ CAREFULLY

This manual contains important information about the correct installation, operation and maintenance of this equipment. All persons involved

in the installation, operation and maintenance of this equipment must be thoroughly familiar with the contents of this manual. To safeguard

against the possibility of personal injury or property damage, follow the recommendations and instructions of this manual. Keep this manual for

reference.

WARRANTY STATEMENT

SIMPLEX products are warranted to be free of defects in materials and workmanship under normal use for as long as the original purchaser

owns them, subject to the guidelines and limitations listed. This warranty does not cover: normal wear & tear, cosmetic items, abuse, overload-

ing, alterations, improper lubrication, or use in a manner for which they are not intended. If the customer believes a product is defective, the 

product must be delivered, or shipped freight prepaid, to the nearest SIMPLEX Authorized Service Center for evaluation and repair.

RECEIVING INSTRUCTIONS

Important! Make sure to inspect all of the components for shipping damage. If damage is found, notify carrier at once. Shipping damage will

not be covered by warranty. The carrier is responsible for all loss associated with shipping damage.

 

 

 

 

 

 

CONTENTS

SECTION

Safe Operating Procedures and Precautions ................................................................................................................................ 1.0

Technical Specifications ................................................................................................................................................................ 2.0

Jack Operating Instructions ........................................................................................................................................................... 3.0

Maintenance & Lubrication ............................................................................................................................................................ 4.0

 

Note

 - 

This Operational Manual is intended as a technical guideline only. SIMPLEX accepts no liability for any use or reliance made of any information

in this Operational Manual. All information, illustrations and specifications in this Operational Manual are based on the latest information

available at the time of publication. SIMPLEX reserves the right to make changes at any time without notice. Equipment operators and installers

shall be responsible for ensuring that a safe working environment and safe systems of work are in place before operating the equipment. 

©2011 SIMPLEX

INDEX

English:. . . . . . . . . . . . . . . . .  1-4

Deutsch: . . . . . . . . . . . . . . . . .5-8

Dutch  . . . . . . . . . . . . . . . . . .9-12

Italiano . . . . . . . . . . . . . . . .13-16

Español: . . . . . . . . . . . . . . .17-20

Francais . . . . . . . . . . . . . . .21-24

Содержание SER10

Страница 1: ...lieves a product is defective the product must be delivered or shipped freight prepaid to the nearest SIMPLEX Authorized Service Center for evaluation and repair RECEIVING INSTRUCTIONS Important Make sure to inspect all of the components for shipping damage If damage is found notify carrier at once Shipping damage will not be covered by warranty The carrier is responsible for all loss associated w...

Страница 2: ...t supports have been inspected and approved by a safety engineer or qualified person of authority WARNING Any jack exceeding 40 7 LBS 18 5 Kg should be positioned or transported by mechanical means using the lift point indicated on the jack decal IMPORTANT Prior to operating the jack to lower the load read operating instructions Operator should perform the lowering process and follow the procedure...

Страница 3: ...on load binder so it can be operated from the ground or in a manner where your footing is secure Make sure that the jack is rigidly and se curely attached at the eyelet connection 1 The Ratchet Load Binder pawl has two positions for expansion or pulling application DANGER These jacks are not equipped with safety stops Do not exceed the maximum screw extensions shown in the table section 2 0 Exceed...

Страница 4: ... inspection testing and maintenance requirements of ANSI B30 1 as determined from use experience or as specified by a qualified person of authority ANSI B30 1 Safety Standards Please visit www ansi org and type jacks in the search window 2 Keep jack clean free of grit and in good working condition 3 Lubricate load screw threads with 2 graphite grease 4 Lubricate periodically other working parts wi...

Отзывы: