1230B0015201
Hardware Operation
2-6
2.3.2 To install the heat sink
When installing the heat sinks, please pay more attention to the direction of them. The directions of
the heat sinks and two pieces of sponge are shown as below:
Figure 2-7 Heat Sink and Sponge Location
Note:
Make sure these two heat sinks must be installed as the above pictures shows.
Please don’t mistake the position of them.
Place the heat sink onto the socket and
align the fasteners with the four holes on
the board.
Figure 2-8 Putting down the heat sink
Press down the fastener caps and then
rotate the fasteners clockwise to fix the
heat sink.
Figure 2-9 Rotating the fasteners to fit the heat sink