8
** If you intend to use a PSU with 20-pin and 4-pin power plugs, make sure that the 20-pin
power plug can provide at least 15A on +12V and the power supply unit has a minimum
power rating of 350W. The system may become unstable or may not boot up if the
power is inadequate.
(2)
ATX 12V Power Connector (4-pin block) : ATX12V1
This is a new defined 4-pins connector that usually comes with ATX Power Supply.
The ATX Power Supply which fully supports AM2 processor must including this
connector for support extra 12V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
(3) PS/2 Mouse & PS/2 Keyboard Connector: KB1
This connector is for PS/2 keyboard and PS/2 Mouse.
(4) USB Port connector:
The connectors are 4-pin connector that connects USB devices to the system board.
(5) LAN Port connector: UL1
This connector is standard RJ45 connector for Network.
The USB LAN1 support 10M/100Mb data transfer rate.
(6)
Audio Line-In,
Lin
-Out, MIC Connector: SURROUND1 / CN1
This Connector is 3 phones Jack for LINE-OUT, LINE-IN, and MIC
Line-in:
(BLUE) Audio input to sound chip
Line-out: (GREEN) Audio output to speaker
MIC:
(PINK) Microphone Connector
PS/2
Mouse
USB1
COM
Connector
Line-IN
MIC-IN
PS/2
Keyboard
VGA Connector
Line-OUT
