PN 0402246-01
Page 1 of 17
Virtex-II Pro™ ML300 Evaluation Platform - Installation Instructions
The following pages will guide you through the software installation for the Virtex-II™ Pro ML300
Evaluation Platform. To skip the complete installation and immediately try out your ML300, refer to the
ML300 Quick Start
card.
About the CDs
The Virtex-II Pro ML300 Evaluation Platform includes the following CDs:
•
ISE 6.2i CD – PC, Disk 1 of 2, Design Environment and Documentation (Windows evaluation
version)
•
ISE 6.2i CD – PC, Disk 2 of 2, Device Files (Windows evaluation version)
•
EDK 6.2i CD – Embedded Development Kit
•
Embedded Alliance Partner CDs (evaluation versions)
System Requirements
The Virtex-II Pro ML300 Evaluation Platform CDs have been tested on the following platforms, with
the tools and versions specified.
System Requirements
Operating System
Windows 2000 SP2
Windows XP
Solaris 2.8
Memory
256 MB
Disk Space
3 GB
Tool Requirements
FPGA
ISE 6.2i *
Embedded &
Software
EDK 6.2i **
Simulation
ModelSim SE 5.7x ***
Debug
ChipScope Pro **
*
- PC evaluation version included
** - Full version included
*** - Not included
Note: Operation under Solaris 2.8 requires a full version of ISE 6.2i, which is not included.
www.BDTIC.com/XILINX
