background image

Mainboard User’s Manual 

 

This publication, including all photographs, illustrations and 
software, is protected under international copyright laws, with all 
rights reserved. Neither this manual, nor any of the material 
contained herein, may be reproduced without the express written 
consent of the manufacturer. 
The information in this document is subject to change without 
notice. The manufacturer makes no representations or warranties 
with respect to the contents hereof and specifically disclaims any 
implied warranties of merchantability or fitness for any particular 
purpose. Further, the manufacturer reserves the right to revise this 
publication and to make changes from time to time in the content 
hereof without obligation of the manufacturer to notify any person 
of such revision or changes. 

Trademarks 

IBM, VGA, and PS/2 are registered trademarks of International 
Business Machines. 
AMD, Duron and Athlon are registered trademarks of Advanced 
Micro Devices Inc. 
Intel, Pentium/II/III, and MMX are registered trademarks of Intel 
Corporation. 
Microsoft, MS-DOS and Windows 95/98/NT/2000 are registered 
trademarks of Microsoft Corporation. 
PC-cillin and ChipAwayVirus are registered trademarks of Trend 
Micro Inc. 
AMI is a registered trademark of American Megatrends Inc. 
A3D is a registered trademark of Aureal Inc. 
MediaRing Talk is a registered trademark of MediaRing Inc. 
3Deep is a registered trademark of E-Color Inc. 
ALi is a registered trademark of Acer Laboratories Inc. 
Other names used in this publication may be trademarks and are 
acknowledged. 
 
 
 

Copyright © 2001 

All Rights Reserved 

M817 Series, V1.3A 

A1647X/April 2001 

Summary of Contents for M817 Series










































Reviews: