29
*Note:
This function is supported when EUP Function is set as [Disabled].
PWRON After PWR-Fail
The optional settings: [Former-Sts]; [Always On]; [Always Off].
*Note:
This function is supported when EUP Function is set as [Disabled].
Watchdog Function
Use this item to enable or disable Watchdog function. When set as [Enabled], the
following sub-items shall appear:
Watchdog Timer Unit
The optional settings are: [Sec.]; [Min.].
Watchdog Timer Value
User can set a value in the range of [0] to [255].
►
H/W Monitor
Press [Enter] to view current PC health status and make settings for the following
sub-items:
CPUFAN1 Smart Mode
Press [Enter] to make settings for CPUFAN1 Smart Fan Configuration:
The optional settings are: [Disabled]; [Enabled].
When set as [
Enabled
], the following sub-items shall appear:
FAN Highest Speed Temp
Use this item to select a value at which the fan will run at the highest speed when
the temperature is higher than preset limit.
FAN Idle Temp
Use this item to select a value at which the fan will run at idel speed when the
temperature is lower than this preset limit.
►
Shutdown Temperature
Press [Enter] to further select system shutdown temperature.
Shutdown Temperature
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [60C/140F]; [65C/149F]; [70C/158F];
[75C/167F] ; [80C/176F]; [85C/185F]