28
Select [Manual] you can set value for the following sub-item:
‘Device Power-up
delay in seconds’.
Device Power-up delay in seconds
The delay range is from 1 to 40 seconds, in one second increments.
►
Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
►
Serial Port 1 Configuration/Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
►
Parallel Port Configuration
Press [Enter] to make settings for the following items:
Parallel Port Configuration
Parallel Port
Use this item to enable or disable parallel port (LPT/LPTE).
Change Settings
Use this item to select an optimal setting for super IO device.
Device Mode
Use this item to change the printer port mode.
The optional settings are: [Standard and Bi-direction (SPP) mode]; [ECP Mode];
[ECP Mode & EPP 1.9 Mode] [Printer Mode].
PS2 Keyboard/Mouse Swap
The optional settings: [Disabled]; [Enabled].
Wakeup by PS/2 keyboard
The optional settings: [Enabled]; [Disabled].
Use this function to enable or disable PS/2 keyboard wake-up from S3/S4/S5.
*Note:
This function is supported when EUP Function is set as [Disabled].
Wakeup by mouse
The optional settings: [Enabled]; [Disabled].
Use this function to enable or disable PS/2 mouse wake-up from S3/S4/S5.