Texas Instruments ADS54J42 User Manual Download

Page: 1 / 22

SLAU674 – February 2016

Submit Documentation Feedback

ADS54J42EVM

Microsoft, Windows are registered trademarks of Microsoft Corporation.

User's Guide

SLAU674 – February 2016

ADS54J42EVM

This user's guide describes the function and use of the ADS54J42 evaluation module. Included in this
document are a quick-start guide, instructions for optimizing evaluation results, software description,
alternate hardware configurations, and jumper, connector, and LED descriptions.

Contents

Overview

......................................................................................................................

1.1

Required Hardware

.................................................................................................

1.2

Required Software

..................................................................................................

1.3

Evaluation Board Feature Identification Summary

.............................................................

1.4

References

..........................................................................................................

Quick Start Guide

............................................................................................................

2.1

Software Installation

................................................................................................

2.2

Hardware Setup Procedure

.......................................................................................

2.3

Software Setup Procedure

.........................................................................................

2.4

Quick Start Trouble Shooting

.....................................................................................

Optimizing Evaluation Results

............................................................................................

3.1

Clocking Optimization

.............................................................................................

3.2

Coherent Input Source

............................................................................................

3.3

HSDC Pro Settings

................................................................................................

Software Description

.......................................................................................................

4.1

ADS54Jxx EVM GUI

..............................................................................................

4.2

Low Level View

....................................................................................................

Alternate Hardware Configurations

......................................................................................

5.1

Clocking Options

..................................................................................................

5.2

Analog Input Options

.............................................................................................

Appendix A

Jumper, Connector, and LED Descriptions

....................................................................

List of Figures

EVM Feature Locations

.....................................................................................................

Quick Start Test Setup

......................................................................................................

ADS54Jxx GUI Low Level View Tab

......................................................................................

HSDC Pro GUI Main Panel

.................................................................................................

Channel 1 Data Capture Results from Quick Start Procedure

.........................................................

ADS54Jxx GUI

..............................................................................................................

Low Level View Tab

.......................................................................................................

GUI CMOS Selection

......................................................................................................

LMK04828 Clock Outputs Tab

...........................................................................................

List of Tables

Quick Start Performance Measurements

.................................................................................

Troubleshooting Tips

........................................................................................................

HSDC Pro Settings to Optimize Results

................................................................................

ADS54Jxx GUI Tab Descriptions

........................................................................................

Low Level View Controls

..................................................................................................

Summary of Contents for ADS54J42























Search results

Summary of Contents for ADS54J42

Reviews:

Related manuals for ADS54J42

Brands by name

Popular brands

Texas Instruments ADS54J42, User Manual

Search results

Summary of Contents for ADS54J42

Reviews:

Related manuals for ADS54J42

Brands by name

Popular brands