AMCC 3ware 9000 Series, Руководство пользователя

Страница: 29 / 202

Working in the 3BM Screens
www.3ware.com 23
section “Replacing an Existing Controller with a New Controller,” in the
3ware 9000 Series Serial ATA RAID Controller Installation Guide .)
When some of the drives are remaining from a unit, you can power down
and add the missing drives to complete the unit. To use drives that are
listed here in other units, you must first delete them. For more
information, see “Deleting a Unit” on page 103.
If any of the sections are not shown, it means that there are no items of that
type connected to the controller.
Table 4 lists how to move around and select information in the 3BM screens.
When these commands are available in 3BM, they appear at the bottom of the
3BM screen.
Table 4: Working in 3BM
To do this Use these keys
Move between units or drives in a list, and
between fields, and buttons Up and Down Arrow Keys
OR
Left and Right Arrow Keys
OR
Tab and Shift+Tab
Select (or unselect) what is currently
highlighted.
A selection may be a drive in a list of
drives, a button at the bottom of the
screen, or a field in the middle of the
screen.
In lists, an asterisk appears to the left of
selected drives or units
Enter or the Spacebar
Display a drop-down list of available
choices in a field Enter
Move between choices in a field list Up and Down Arrow Keys
Select all available drives Alt+A
Highlight one of the primary buttons on
the main screen:
„
Create
„
Delete
„
Maintain
„
Rebuild
„
Policy
„
BBU
Alt+C
Alt+D
Alt+M
Alt+R
Alt+P
Alt-B
Specify (or unspecify) a drive as a hot
spare S