manualshive.com logo in svg

AMCC 3ware 9000 Series, Руководство пользователя

Поделиться
Скачать
AMCC 3ware 9000 Series Скачать руководство пользователя страница 160

Maintaining Your Controller

154

3ware 9000 Series Serial ATA RAID Controller User Guide

For Red Hat SMP

mkinitrd –v –f initrd-

<kernel>

smp.img 

<kernel>

smp 

For Red Hat Bigmem

mkinitrd –v –f initrd-

<kernel>

bigmem.img 

<kernel>

bigmem 

For Red Hat Hugemem

mkinitrd –v –f initrd-

<kernel>

hugmem.img 

<kernel>

hugmem 

7

If you are using lilo, run lilo to update to the boot loader.

You should see a printout of kernels that are able to boot on this system 
after running lilo.

Updating the 3ware Driver Under SuSE

Note:

 Pre-compiled, tested, and supported drivers are no longer 

available for older SuSE releases using the 2.4 kernel. The source 
code is still available (for a limited time) if a newer driver is still 
needed. Check the release notes for more details regarding 
supported operating systems.

1

Download and extract the driver, as described on page 140.

2

Backup any critical data prior to updating the 3ware driver.

3

Change the directory to the location with the extracted driver.

4

Copy the files to the appropriate directory.

(In the commands below, replace <version> with applicable SuSE 
version, such as su91)

Replace <kernel> with applicable kernel (i.e.: 2.6.21-4GB) 

For SuSE Uniprocessor (2.6 kernels)

cp 

<version>

/3w-9xxx.ko /lib/modules/

<kernel>

/drivers/scsi

For SuSE SMP (2.6 kernels)

cp 

<version>

/3w-9xxx.smp /lib/modules/

<kernel>

/kernel/

drivers/scsi/3w-9xxx.ko

For SuSE high memory systems (2.6 kernels)

cp <version>/3w-9xxx.big /lib/modules/<kernel>/kernel/

drivers/scsi/3w-9xxx.ko

5

Run 

/sbin/depmod -a

6

Make sure the 

file /lib/modules/<kernel string>/modules.dep

 

contains an entry for 3w-9xxx. If not, add it after the 

3w-xxxx

 entry. 

Содержание 3ware 9000 Series











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды