www.amcelettronica.com
Installation Instructions
soutdoor L
SOUTDOOR
Input Voltage
0.5 to 13.8 V
Current Drain (Alarm / Stand-By)
25 mA / 14 mA @ 13.8V
Coverage
6/12 m
Aperture Angle
90°
2 PIR / Pyroelectric
full digital
Lens 1
Fresnel (22 Patterns on 3 levels)
Lens 2
Fresnel horizontal curtain (11 Patterns 1 level)
OPTIONAL Lens
Fresnel, vertical (11 Patterns 11 level)
Alarm period
2 sec.
Anti-opening
✔
Back Tamper
✔
Alarm contact
0.2 A - 24 Vcc
Tamper Switch
Max 40 mA - 30 Vcc
Operating Temperature
From -30 °C to +55 °C
Storage Temperature
From -30 °C to +60 °C
RFI Protection
30 V / m (80 /1000 MHz)*
Walk Test LED (MW and PIR)
✔
Housing / Cover
ABS
Dimensions
185 X 85 X 70 mm
weight
265Gr
technicaL features
Installation must be performed according to accepted standards by specialized personnel.
The manufacturer shall not be responsible if the product is tampered with by unauthorised persons.
We recommend that you check the correct operation of the alarm system at least once per month. A reliable electronic
alarm system does not prevent intrusions, robberies, fires or other occurrences but simply reduces the risk of occurrence.
Installation must be carried out following the local installation norms by qualified personnel.
The manufacturer refuses any responsibility when changes or unauthorized repairs are made to the product/system.
It is recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and
due to, but not limited to, any or all of the following: tampering, electrical or communication disruption or improper use, it
is possible for the product/system to fail to prevent burglary, rubbery, fire or otherwise. A properly installed and maintained
alarm system can only reduce the risk that this happens.
