background image

www.amcelettronica.com

Installation Instructions

soutdoor L

soutdoor L

instaLLation

v1.0

    

 

 

    Double PIR outdoor Detector

1. introduction

engLish

SOUTDOOR-L is a Dual Digital PIR sensor, with an analysis system that takes into account the two most important 

changes that may occur during a movement: the speed and the intensity.  With the simultaneous comparison

of these two information, the sensor is able to discriminate repetitive movements from intrusion, lowering

the percentage of false alarms. With hight thermal variations, the totally digital temperature compensation

system, guarantees a great performance. Has 15mt coverage, with angle of 90 °. With usable different type of lens it 

is possible use the sensor in different situation, related to the height positioning, and the type of protection required, 

eg. curtain protection etc.

Characteristics:

• 

Dual technology outdoor sensors (2 digital PIR with 4 seconds AND operation).

• 

Different types of lenses depending on the type of installation (volumetric; vertical/horizontal).

• 

PET immune.

• 

Back tamper and anti-opening tamper.

• 

Range adjustable 6 meters or 12 meters.

• 

Walking test led 

• 

Double pulse

• 

Bracket

Содержание soutdoor L










Отзывы: