Ambrell 3542, Руководство пользователя

Страница: 47 / 75

Technical Information 47
A
MBRELL
801-9526-00.doc
Precision Induction Heating
To Configure Your Computer
The following is one way to configure the serial port of your computer; you may have
your own devices or means of making the communications connection.
Do this... Observe...

launch HyperTerminal from Programs > Accessories > Communication (or other
serial communication application).

 enter a ‘connection name’ such as
EASYHEAT then select:

COM1 (or appropriate for your device)

38400 baud (or appropriate for your
device)

8 data bits; parity = none; stop bits = 1

flow control NONE
 click OK

 Click Disconnect (upper image)
 Click Properties (lower)

 Select Settings; set like this

 Select ASCII setup; set like this:

 Select File >> Save to keep
these changes

 attach the converter kit (9 –
pin D-submin or USB) to the
selected comm. port of your PC

 attach RJ-45 modular plug
of converter to rear of
EASYHEAT

 follow steps to install driver
for converter

 (some units) ensure converter settings →
Data device type Comm Mode
DCE SIM TxON/RxON