21
2.2.8 Burner/Fan Assembly.
Slide the burner assembly onto the open tube
end, ensuring it is fully engaged. Secure with set
screws.
For the purpose of unvented applications, a 4”
90° elbow should be used on the terminating
end of the radiant tube sections. This elbow
should be turned with the outlet facing either
side.
Connect gas and electrical supplies as
described in sections 1.4 and 1.5.
2.2.9 Heater Configurations
The sketches shown on the following page show
various heater configurations for the model
series dependant on heater length and rating. It
is important not to configure a heater outside of
these recommendations.
2.2.10 Detailed Assembly Drawings
The pages following that show the technical
dimensional details of the range of heaters.
Please note the heater type, length and
reference number from the delivery/advice note
before identifying the correct model drawing.