Ambient TinyLockit ACN-TL, Руководство пользователя

Страница: 15 / 28

ACN-TL
experience quality .
Rev. 6.00
www.ambient.de/en
13
Sync Menu
↑ Video (L) Audio (L) PPF (TL (E)) Off
Only available on Lockit and TinyLockit (Extended mode)
Video
480i(E)/576i(E)/720P(E)/1080i/Psf/P Single/Dual/3D(E)
Only available on Lockit
Enables Genlock video sync output on BNC. Standard menu only offers 2 options applicable for current
cameras: 1080P or i/PsF with i/PsF being automatically selected depending on FPS. Extended mode also
allows for 720p and SD formats 480i (NTSC) or 576i (PAL). Also only in Extended you can match the
level/impedance for single or dual camera load (required for 3D rigs).
Selecting either PAL or NTSC will possibly override previous FPS selections , as it automatically applies
the only matching frame rates of 50i or 59.94i with the only option to switch between non drop and
drop timecode in case of the latter.
Note: activating Video sync will also enable PPF shutter sync on pin 3 of the “ TC ” Lemo port.
Audio
Only available on Lockit
Activates a 48.000 KHz wordclock signal on the BNC to sync audio recorders.
PPF
Only available on TinyLockit
P ulse P er F rame is a shutter sync at the selected framerate and used to clock some industrial cameras.
Available on pin 3 of the “TC” Lemo connector.
Off
If not required, it is recommended to disable sync output to reduce current draw and allow for
automatic setting of the frame rate on jam. Also, this must be selected to allow tuning via the now
obsolete controller ACC101 or 501.