Ambient TinyLockit ACN-TL, Руководство пользователя

Страница: 23 / 28

ACN-TL
experience quality .
Rev. 6.00
www.ambient.de/en
21
TRX
This special mode will allow the units to operate as an enhanced TC radio link. Again, this is not your
ordinary timecode over wireless, neither is it suited for standard synchronization purposes. Instead the
transmitting unit will jam its free running generator to incoming TC with auto frame setting and then
send information whether the source is running, stopping with standing TC or has stopped altogether.
The receiving unit(s) will then duplicate the TC source’s status as it would directly be connected without
danger of drop outs comp romising the desired functionality. This not only works with “classic” SMPTE
TC but also MIDI timecode (MTC) with the Lockit device connected to MAC or PC via USB acting as a USB
MIDI interface.
As all current products including the Lockit Slate come equipped with ACN transceiver any device can
serve as transmitter or receiver. This dramatically cuts down costs for additional equipment at a
maximum of flexibility.
However, as the transmitter is only jammed but not synchronized by the source and also the receiving
units may stop their timecode and sync outputs this is not suited to reliably sync a system and only
recommended for 2 applications. One being playback where you need to display pre-recorded
timecode on a slate and the second being documentaries to remote roll an audio recorder via rec run
timecode of a camera.
Note: Always leave supplied antenna attached. In case of lost only substitute with original genuine
manufacturer replacements parts ANT-2.4-SMA-M (straight) and ANT-2.4-SMA-M90 (angled).