6
www.ambient.de
7.
Menu Description
MAIN DISPLAY
The main display is the normal operation mode. It
displays the most important status information.
These are the time code momentarily running, the
sync signal type and rate, the time code frame
rate, and various additional information:
“X” next to the Fps indication indicates a cross-jam mode, i.e. the time code rate is not
consistent with the sync rate, but compatible and in sync at each second’s transition.
“a” down left indicates the jam mode “auto”, “-“ indicates “off” – no external jamming
available, “m” indicates manual / once
“I” indicates external TC port open for jamming, disappears while port is closed.
“+00:00” indicates the offset
Information related to ACN will be displayed once it is activated (not in release firmware)
If the display is switched off (power save), pushing the config switch once will turn it on
again without doing any changes. Also, external time code jam activates the display.
MAIN MENU
Pushing the config switch once enters the main
menu screen. The main operation parameters are
further displayed. In this screen, you can select
the different settings by pushing the config switch.
Navigate by toggling the config switch left or right.
Pushing the config switch when EXIT is highlighted exits to the main screen.
If no action is done, the unit will return to the main screen as well.
