13
www.ambient.de
If the selected time code frame rate is incompatible to the currently set video signal type, a
message appears:
You have no choice but to press the config switch
and are automatically taken to the VIDEO setting:
While the time code is inconsistent with the video rate,
a “!” is shown next to the time code Fps indication.
Select a video signal that matches your time code
frame rate. If you do not adjust video signal to a
value compatible to the time code frame rate
selected, you will be taken back to the TC setting.
There is no way out of this loop with an
invalid combination!
See above in SYNC>VIDEO.
SYS MENU
The SYS menu serves to configure various
parameters, in this release version the display
behavior and the BNC sync signal impedance are
set. Push the config switch to enter.
SYS>CONFIG
Enter the configuration by pushing in the config
switch
Navigate to DISPLAY or BNC, push the config
switch to select.
SYS>CONFIG>DISPLAY
Adjust display brightness from 1 to 10 toggling the
config switch left/right. Push in to select value.
The curser will jump to the Auto-off settings:
