8
www.ambient.de
GEN>EDIT
In this screen, you can edit a time code value
manually.
Decrease or increase by toggling left/right.
Holding left/right is fast backward/ forward. Push
to select.
Pushing the config switch while on the frames position sets the time. To avoid inadvertently
changing the time code, you will be asked:
Pushing the config switch while “old” is highlighted discards the changes and returns to the
main menu.
Pushing the config switch while “new” is highlighted will set the generator to the selected
value.
CAUTION! Resetting the generator will restart the video or audio sync signal, doing this
while recording will result in a corrupted file.
GEN>OFFSET
An offset can be entered between the jammed
time code and the time code on the output of the
ACL 204. Use this to compensate the processing
delay that some file base cameras produce.
This shifts only the time code, the sync signal stays locked to the frame start of the jammed
time code running in background.
The offset has a range of +/- 10 frames in 0.05 frames steps (equals 2 ms at 25 fps).
