Touch Screen Transmitter Manual Timer Instructions
Page:
20300538
WARNING
Important Safey Information
•
This remote control system should only be used as described in this manual. Any other use is not
recommended and will void the warranty.
•
Read this manual thoroughly prior to installing, programming or operating any remote control.
•
This remote control system is designed for use with a millivolt gas valve system. Do not use this
remote control system on applications with voltages above 30 Volts AC.
•
This remote control system requires
Four (4)
“AAA” alkaline batteries to power the transmitter
and Four (4) “AA” batteries to power the receiver. Wiring must conform to appliance require-
ment and building codes/ordinances as required by local and national code authorities having
jurisdiction.
•
Do not short (or jumper) across the gas valve terminals to test the remote control installation. This
could damage the unit and void the warranty.
•
This remote control system should only be used as described in this manual. Any other use is not
recommended and will void the warranty.
NOTE
Due to the sensitive temperature monitoring components in the transmitter, it is
necessary to allow the transmitter to stabilize to room temperature before accurate
room temperatures are displayed. If the transmitter is activated from a severe cold
condition, allow 15 minutes for accurate temperature readings to appear on the LCD
display.
W
ARNING
Turn appliance OFF and allow to cool before installing or servicing. The remote
operator must be installed exactly as outlined in these instructions. Read all instruc-
tions completely before attempting installation. Follow instructions carefully during
installation. Any modification of components will void the warranty and may cause a
fire hazard.
W
ARNING
Turn appliance OFF (at the appliance or remote receiver) if you are away from your
house for an extended period of time. Never leave anything on top of the surface of the
transmitter.
f i r e - p a r t s . c o m
