50D0111
RCSITEA Installation & Operating Manual
Rel 1.0 April 2009
Page 11 of 10
Ambient Technologies
A Division Of Monessen Hearth Systems
receive signal.
located inside to tight of an
enclosure.
6. Blower is not on
after the fireplace is
turned on
1.
Blower setting is off
2. Blower delay setting is set too high
1. Press FAN key to select Fan
speed you desire.
2. Press and hold FAN key to set
desired ON/OFF delays. This is
done in minutes.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
This warranty gives you specific legal rights and you may also have other rights that vary from state to state or
province to province. Answers to any questions regarding our limited warranty may be obtained by writing our
corporate offices.
Ambient Technologies warrants each new Ambient Technologies remote control against any defects that are due to
faulty material or workmanship to the original owner, for a period of five years after the original date of purchase.
This warranty and our liability does not apply to batteries, nor does it include damage to merchandise or the remote
control resulting from accident, alteration, neglect, misuse, improper installation or any other failure to follow
Ambient Technologies installation and operating instructions.
After contacting Ambient Technologies Tech Service to receive a return authorization number, we agree
to repair or
replace at our option any Ambient Technologies remote control under warranty. Provided it is returned postage
prepaid to our warranty facility in a padded carton within the warranty period, with proof of the original date of
purchase and a brief description of the malfunction. This limited warranty does not include the cost of removal or
re-installation.
Ambient Technologies
149 Cleveland Drive
Paris KY 40361
FOR TECHNICAL SUPPORT
