Amber M32, Инструкция по установке и обслуживанию

Страница: 33 / 42

29
Copyright 2018 by Amber Kinetics. All rights reserved. 3 - INSTALLATION
3.8 - Completing the Installation
To complete the installation:
1. Visually inspect the M32 flywheel and Capsule to
ensure that no tools or other debris remain in the
Capsule.
2. Complete backfilling around the Capsule(s), taking
care not to allow dirt or other debris to fall inside
the Capsule(s).
3. Connect a lifting strap and shackle to the lifting
point at the top of the Capsule Lid. Connect the
other end of the strap to the crane or forklift, and
then hoist the Capsule Lid up and over the
protruding Capsule. If needed, use one or more
tagline(s) and/or manipulator(s) to center the
Capsule Lid as you gently lower it into position,
being sure not to damage any conduits or wiring.
Figure 23: Capsule Lid in position over the Capsule
WARNING: REMAIN WELL CLEAR OF
THE CAPSULE LID WHILE THE HOIST
IS IN PROGRESS.