Amazone KE 3002, Оригинальное руководство по эксплуатации

Страница: 109 / 120

12. Fasten the wheel mark eradicator
1
in the
bracket with the locking pins
2
.
13. Secure the locking pins with the linch pins.
14.
To prevent the tool carriers from constantly
working in the soil horizon,
move the wheel mark eradicator to a higher
position.
15. Secure the wheel mark eradicator at the desired
position with the locking pin
3
.
16. Secure the locking pin with the linch pin.
1
2 3
CMS-I-00003340
9.4 Cleaning the machine
IMPORTANT
Risk of machine damage due to cleaning
jet of the high-pressure nozzle
Never direct the cleaning jet of the
high-pressure cleaner or hot water
high-pressure cleaner onto the marked
components.
Never aim the cleaning jet of high-
pressure cleaners or hot water high-
pressure cleaners on electrical or
electronic components.
Never aim the cleaning jet of the high
pressure cleaner directly on lubrication
points, bearings, rating plates, warning
signs, and stickers.
Always maintain a minimum distance
of 300 mm between the high-pressure
nozzle and the machine.
Do not exceed a water pressure of 120
bar.
Clean the machine with a high-pressure cleaner
or a hot water high-pressure cleaner.
CMS-T-00000593-C.1
9 | Repairing the machine
Cleaning the machine
MG6878-EN-II | D.1 | 18.05.2021 103