Additional operating instructions for the towed AMAZONE GHL-T
Lift Groundkeeper
Groundkeeper GHL; GHL-T SMARTCUT BAF0006.2 05.17
61
10.2.1
Rear guide wheel vibration damping
On relatively long road journeys, especially if the machine is unladen,
it is recommended that vibration damping for the rear guide wheels
should be engaged.
This will prevent the guide wheels from swinging backwards and for-
wards, thereby avoiding increased tyre wear.
Engaging/disengaging vibration damping:
•
Reset until the guide wheels are facing away from the direction
of travel (fig. 10.2.1-1).
•
Remove the lynch pin from the damper sleeve.
•
Turn the damper sleeve over (fig. 10.2.1-2).
•
Refit the lynch pin.
Damping must be engaged on both guide wheels.
