Attaching and detaching the machine to/from the tractor
34
Groundkeeper GHL; GHL-T SMARTCUT BAF0006.2 05.17
The diameter of the lower link pins corresponds to CAT I.
Adapter sleeves will have to be used for CAT II.
In order to guarantee that the machine is attached to and detached
from the tractor safely, it is recommended that the procedure be car-
ried out in the following sequence:
•
Attach the PTO shaft to the free shaft end on the machine. (If
freewheel PTO shafts are used, the freewheel must be attached
on the machine side).
•
Hook the tractor lower link arms into the three point sockets.
•
Secure all pins using the appropriate securing plugs.
•
Attach the PTO shaft to the tractor's universal joint shaft.
(
Caution
: make sure that the PTO shaft is the correct length,
otherwise the tractor or the machine's angular gearbox may be
damaged when the machine is raised).
•
Attach the upper link.
Choice the optimal adjustment of the upper 3-point linkage.
•
Pretension the upper link to halfway along the slotted hole (see
fig. 5-2/1)
•
Plug in the hydraulic lines
