Additional operating instructions for the towed AMAZONE GHL-T
Lift Groundkeeper
Groundkeeper GHL; GHL-T SMARTCUT BAF0006.2 05.17
59
If the machine is parked on uneven ground after adjustments have
been completed, the spring upper link must be pretensioned to ap-
proximately half way along the slotted hole (fig. 10.1.2-3). If this is not
the case, the active length of the chain on the spring upper link must
be corrected. The check should always be carried out if the height
adjustment of the front guide wheels or cage roller has been altered.
10.1.2.1 Adjusting the spring mechanism
In order to make the best possible use of the machine, the pretension
of the upper link can always be exactly adjusted or adapted. By hook-
ing the chain links into the slot of the slotted hole on the upper link,
the active length of the chain can be altered as follows:
•
Extend the rear guide wheels until the tension on the spring upper
link chain has been released.
•
Remove the safety splint from the pin of the tension plate (directly
behind the slotted plate).
•
Remove the pin.
