Amazone GreenDrill 200-E, Руководство по эксплуатации

Страница: 17 / 70

General Safety Instructions
GreenDrill BAH0054-4 02.13
17
1.14.2 Electrical system
When working on the electrical system, always disconnect the battery (negative terminal).
Only use the prescribed fuses. If fuses are used that are too highly rated, the electrical system
will be destroyed – danger of fire!
Ensure that the battery is connected correctly - first connect the positive terminal and then con-
nect the negative terminal. When disconnecting the battery, disconnect the negative terminal
first, followed by the positive terminal.
Always place the appropriate cover over the positive battery terminal. If there is accidental earth
contact, there is a risk of explosion.
Risk of explosion. Avoid the production of sparks and naked flames in the vicinity of the battery!
The machine can be equipped with electronic components, the function of which may be influ-
enced by electromagnetic interference from other units. Such interference can pose risks to
people, if the following safety information is not followed.
In the case of retrofitting of electrical units and/or components on the machine, with a con-
nection to the on-board power supply, the user must check whether the installation might
cause faults on the vehicle electronics or other components.
Ensure that the retrofitted electrical and electronic components comply with the EMC direc-
tive 89/336/EEC in the appropriate version and carry the CE mark.
1.14.3 Operation of the seed drill
Observe the permissible fill levels of the seed box (capacity of the seed box).
Only use the steps and the platform when filling the seed box.
It is forbidden to ride on the machine during operation.
During the calibration test, note the danger points from rotating and oscillating machine parts.
Before transportation, remove the thrust collars of the tramline marker.
Do not place any parts in the seed box.
Lock the track marker (construction-dependent) in the transport position before transportation.