Amazone GreenDrill 200-E, Руководство по эксплуатации

Страница: 16 / 70

General Safety Instructions
16
GreenDrill BAH0054-4 02.13
1.14 Safety information for the operator
1.14.1 General safety and accident prevention information
Beside these instructions, comply with the general valid national safety and accident prevention
regulations.
The warning symbols and labels attached to the machine provide important information on safe
machine operation. Compliance with this information guarantees your safety.
Before moving off and starting up the machine, check the immediate area of the machine (chil-
dren). Ensure that you can see clearly.
It is forbidden to ride on the machine or use it as a means of transport!
Drive in such a way that you always have full control over the tractor with the attached machine.
In so doing, take your personal abilities into account, as well as the road, traffic, visibility and
weather conditions, the driving characteristics of the tractor and the attached or hitched machine.
Use of the machine
Before starting work, ensure that you understand all the equipment and actuation elements of the
machine and their function. There is no time for this when the machine is already in operation!
Do not wear loose-fitting clothing. Loose clothing increases the risk of being caught by drive
shafts.
Do not start up the machine until all the safety equipment has been attached and is in the safety
position.
Comply with the maximum load of the connected machine and the approved axle and support
loads of the tractor. If necessary, drive only with a partially filled hopper.
It is forbidden to stand in the working area of the machine.
It is forbidden to stand in the rotating and swivel area of the machine.
There are nip and shear points at externally actuated (e.g. hydraulic) machine parts.
Do not operate externally actuated machine parts unless all persons are an adequate safety
distance from the machine.
Secure the tractor against unintentional start-up and rolling before you leave the tractor.
For this:
Lower the machine onto the ground.
Apply the parking brake
Switch off the tractor engine.
Remove the ignition key.