The
mower unit
Groundkeeper GHD SMARTCUT BAF0007.2 02.21
49
6.2
Mowing
The cutting tools described above are used for mowing or scarifying.
The working speed depends on the density and wetness of the turf. It
must be adjusted to suit the conditions. The maximum PTO shaft
speed of 540 rpm must be observed. The hopper must be emptied in
good time to ensure tidy collection.
The hopper is fitted with an indicator which shows whether the hopper
needs to be emptied (Fig. 6.2).
While the indicator is in the lower position, cuttings can continue to be
collected. When the pointer starts to approach or has reached the
upper position, the hopper must be emptied. The sensitivity of the
indicator is dependent on the type of the cuttings.
