Attaching and detaching the m
40
Groundkeeper GHD SMARTCUT BAF0007.2 02.21
Connection 3: Electrical socket, 3 pin (connection: DIN 9680)
required electrical power
:
12 V
15 A
The remote control supplied with the machine, which is held in place
in the driver's cab by the holder provided, allows the machine to be
operated using only two hydraulic lines and one additional electrical
connection.
If the tractor has no connection for the electrical system, an optional
additional cable with socket can be acquired from the
spare parts portal.
If the plug for the power supply needs to be replaced, care should be
taken to ensure that the brown cable is used as the supply cable (
+
).
Explanation of the remote control (Fig. 5.6.1-2):
1-
On/Off switch
2-
Raise and lower the drawbar
3-
Raise and lower the hopper
4-
Extend and retract the rear hydraulic cylinders
