Attaching and detaching the m
36
Groundkeeper GHD SMARTCUT BAF0007.2 02.21
5.1.4
Safety yoke
Fold the yoke forward and rest it on the drawbar.
5.2
Uncoupling
•
Bring the tractor and machine to a stop in a straight line on a
level area of ground.
•
Retract the hydraulic cylinder on the drawbar. The machine
should be standing on all tyres and the support roller.
•
Turn off the tractor engine, apply the handbrake and remove the
ignition key.
•
2 Remove the wheel chocks from their holders at the rear of the
machine.
•
Secure the machine on both sides with 1 wheel chock under
each of the outside tyres.
Always secure the machine with 2 wheel chocks before you un-
couple the machine from the tractor. The wheel chocks take the
place of the machine's parking brake.
•
Uncouple all supply lines between tractor and machine.
•
Close off the coupling heads on the lines with protective caps.
•
Plug all supply lines into the holders provided.
•
Remove the lynch pin and fold the yoke backwards
•
Depending on the height of the tractor, secure the yoke in the
anchor with the lynch pin (Fig. 5.2)
