The mower unit
48
Groundkeeper GHD SMARTCUT BAF0007.2 02.21
The figure shows the standard equipment with cutting blades and
flail blades H77.
Caution:
When you intend to work on the rotor with the hopper raised,
make sure that the rotor is stationary and fit the safety support
on the hopper.
The rotor is accessed in the following manner:
•
Attach the machine to a tractor.
•
Fully raise the hopper.
•
Fit the safety support on the upper right-hand lifting cylinder of
the hopper (Fig. 6.1-6).
•
Turn off the tractor engine.
•
Fold up the intermediate hood (Fig. 6.1-7).
