manualshive.com logo in svg

Amazone Cenius 4002-2T Super, Руководство по эксплуатации

Поделиться
Скачать
Amazone Cenius 4002-2T Super Скачать руководство пользователя страница 72

 

 

Use of the machine 

 

 

72 

 

Cenius 4002-2T  BAG0100.2  04.13

 

10 

Use of the machine 

 

DANGER! 

 

Observe the chapter "Safety instructions for the user", page 
24, when using the machine. 

 

Observe the warning signs on the machine. The warning 
signs provide you with important hints for the safe opera-
tion of the machine. Compliance with this information guar-
antees your safety! 

10.1 

Changing from transport to working position 

 

  1.  Actuate tractor control unit 1. 

  Lift the implement over the running gear. 

  2.  Raise tractor lower links.  

  3.  Put the protective covers of the two lower tines in park position 

(Fig. 46). 

  4.  Pull on the cable winch for releasing the locking mechanism 

against unintentional unfolding 

and simultaneously 
 

  Operate control unit 1. 

  Fold out the machine. 

  5.  Move both outside discs to operational position 

  6.  Actuate tractor control unit 1. 

  Lift the machine over the running gear 

  7.  Raise tractor lower links. 

10.2 

Operation 

 

 

The machine is coupled to the tractor. 

 

The working depth of the tines and the levelling unit is set. 

 

The machine is in working position. 

 

Avoid reversing when the machine is in working position! 

 

 

 

Adjust the implement using the lower links of the tractor so that 
the frame is parallel to the ground in longitudinal and transverse 
directions during operation! 

 

Do not place the tractor lower links in the float position. 

10.3 

Headland 

 

 

In tight curves, raise the machine to avoid transverse loads on 
the tools! 

 

Lower the machine at the headland only when the machine is 
facing in the working direction!

 

Содержание Cenius 4002-2T Super





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды