Amazone Cenius 4002-2T Super Скачать руководство пользователя страница 34

Страница: 34 / 92

Product description

Cenius 4002-2T BAG0100.2 04.13

4.4

Intended use

The

machine



Is built for conventional use in agricultural operations.



is coupled to the tractor using the tractor draw bar and operated
by an additional person.

Slopes can be navigated as follows:



Along the contours

Direction of travel to left 15 %

Direction of travel to right 15 %



Along the gradient

Up the slope

15 %

Down the slope

15 %

The intended use also includes:



Compliance with all the instructions in this operating manual.



Execution of inspection and maintenance work.



Exclusive use of AMAZONE original spare parts.

Other uses to those specified above are forbidden and shall be con-
sidered as improper.

For any damage resulting from improper use:



the operator bears the sole responsibility,



AMAZONEN-WERKE

assumes

no liability whatsoever.

Содержание Cenius 4002-2T Super





























































































Результаты поиска

Содержание Cenius 4002-2T Super

Отзывы:

Похожие инструкции для Cenius 4002-2T Super

Бренды по названию

Популярные бренды

Amazone Cenius 4002-2T Super, Руководство по эксплуатации

Результаты поиска

Содержание Cenius 4002-2T Super

Отзывы:

Похожие инструкции для Cenius 4002-2T Super

Бренды по названию

Популярные бренды