Coupling and uncoupling the machine
Cenius 4002-2T BAG0100.2 04.13
63
7.1
Coupling the machine
WARNING
Risk of crushing and contusions between the tractor and the
machine when coupling the machine!
Instruct people to leave the danger area between the tractor and the
machine before you approach the machine.
Any helpers may only act as guides standing next to the tractor and
the machine, and may only move between the vehicles when both are
at a standstill.
WARNING
Risk of crushing, drawing in, catching or contusions if the ma-
chine unexpectedly comes away from the tractor!
Use the intended equipment to connect the tractor and the ma-
chine in the proper way.
When coupling the machine to the tractor's three-point hydraulic
system, ensure that the attachment categories of the tractor and
the machine are the same.
Only use the upper and lower link pins provided (original pins)
for coupling the machine.
Visually check the upper and lower link pins for obvious defects
whenever the machine is coupled. Replace upper and lower link
pins if there are clear signs of wear.
Use locking pins to secure the upper and lower link pins against
accidental loosening.
Visually check that the upper and lower link hooks are correctly
locked before you drive off.
WARNING
Danger of breaking during operation, insufficient stability and
insufficient tractor steering and braking power in the event of
improper use of the tractor!
You may only connect the machine to tractors suitable for the pur-
pose. See section "Checking tractor suitability", page 56.
WARNING
Risk of power supply failure between the tractor and the ma-
chine through damaged supply lines!
During coupling, check the course of the power lines. The power lines
must give slightly without tension, bending or rubbing on all
movements of the connected machine.
may not scour other parts.
