Coupling and uncoupling the machine
1. Always inspect the machine for obvious signs of damage during
coupling. Observe here the chapter "Obligations of the user",
page 8.
2. Secure the ball sleeves over the upper and lower link pins in the
pivot points of the three-point attachment frame.
3. Secure each of the upper and lower link pins with lynch pins to
ensure that they do not accidentally come loose. See chapter
"Three-point attachment frame", from page 49.
4. Instruct people to leave the danger area between the tractor and
the machine before you approach the machine.
5. First connect the supply lines to the tractor before coupling the
machine to the tractor as follows:
5.1 Drive the tractor up to the machine in such a way that a
gap (approx. 25 cm) remains between tractor and machine.
5.2 Secure the tractor against unintentional starting and rolling
away. See chapter "Securing the tractor against uninten-
tional starting and rolling away", from page 55.
5.3 Connect the hydraulic hoses, see chapter "Connecting hy-
draulic hoses" from page 48.
5.4 Connect the light system.
5.5 Position the lower link hooks so that they are aligned with
the lower pivot points on the machine.
6. Now reverse the tractor further towards the machine so that the
tractor's lower link hooks connect with the lower pivot points of
the machine.
7. Raise the tractor's three-point hitch hydraulics until the lower link
hooks connect with the ball bushings and automatically lock.
8. Couple the upper links over the upper link hooks with the upper
pivot point of the three-point attachment frame from the tractor
seat.
→
The upper link hook locks automatically.
9. Visually check that the upper and lower link hooks are correctly
locked before you drive off.
58
Cenius 03 BAG0144.5 10.19
Содержание Cenius 3003
Страница 80: ......
