Amazone Cenius 3003 Скачать руководство пользователя страница 17

Страница: 17 / 80

General safety instructions

Order number and explanation

Warning pictograms

MD078

Risk of crushing of fingers/hand by accessi-
ble, moving parts of the machine!

This danger can cause extremely serious injuries
resulting in the loss of limbs.

Never reach into the danger area when the trac-
tor engine is running with the PTO shaft or hy-
draulic/electrical system connected.

MD079

Risk of materials or foreign objects being
flung away by or out of the machine!

These dangers can cause extremely serious and
potentially fatal injuries.

•

Keep a sufficient safety distance from the
machine as long as the tractor engine is
running.

•

Ensure that all other persons also keep a
sufficient safety distance from the danger
area of the machine as long as the tractor
engine is running.

MD 082

Danger of falling from treads and platforms
when riding on the machine.

This danger causes serious or potentially fatal
injuries anywhere on the body.

It is forbidden to ride on the machine and/or
climb the machine while it is running. This also
applies to machines with treads or platforms.

Make sure that nobody is riding on the machine.

MD095

Read and understand the operating manual safe-
ty information before starting up the machine!

Cenius 03 BAG0144.5 10.19

Содержание Cenius 3003

















































































Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды

Amazone Cenius 3003, Руководство по эксплуатации

Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды