Amazone Catros 3001 Скачать руководство пользователя страница 70

Страница: 70 / 90

Transportation

Catros BAG0053.14 10.17

Catros 4001

The transport position corresponds to the opera-
tional position! No conversion is necessary!

This implement is very wide!

Pay attention to your local regulations
for road transport!

Catros -2

1. Lift the implement so that there is sufficient

ground clearance to allow unobstructed
folding in.

2. Clean external tools.

3. Activate control unit

blue

→

Fold the implement.

4. Clean the central tools.

5. Clean the lighting.

6. Lift the implement so that there is sufficient

ground clearance for transport.

Fig. 49

Folded implement in transport position.

Fig. 51

Catros 6002-2:

Pay attention to the height of the Catros in transport position and any
bridges or other obstacles that may catch on the wings while trans-
porting.

Rear harrow (optional)

WARNING

Before folding the implement

•

Install the transport safety bar
(Fig. 50/3).

Risk of injury due to non-
compliance with the approved
transport width.

•

Catros-2: Lock the tines in posi-
tion 2 with the positioning pins
(Fig. 50/1).

Fig. 52

Содержание Catros 3001



























































































Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 3001, Руководство оператора

Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды