Amazone Catros 3001 Скачать руководство пользователя страница 69

Страница: 69 / 90

Transportation

Catros BAG0053.14 10.17

WARNING

Risk of damage during operation, insufficient stability and insuf-
ficient tractor steering and braking power when tractor is im-
properly used!

These risks may pose serious injuries and/or death.

Comply with the maximum load of the connected implement and the
approved axle and support loads of the tractor. (If necessary, drive
only with a partially-filled hopper).

WARNING

Risk of falling from the implement if riding against regulations!

It is prohibited to ride on the implement and/or climb on the imple-
ment.

9.1

Converting from operational to transport position

Catros 3001 and 3501

DANGER

Risk of injury with overwidth transport.

•

Push in and lock the outer border discs / border tines!

The disk rows must each be locked in the
transport position by means of a ratchet on the
left and right of the implement.

1. Lower the implement.

2. Pull the tractor release cord.

3. With the implement lowered, reverse a little

on the field.

→

Move the disk rows to the transport position.

4. Let go of the release cord.

→

The disk rows lock in the transport position.

5. Check the locking of the disk rows.

Disk rows locked:

•

Fig. 47 - Right implement side, position A.

•

Fig. 48 - Left implement side

6. Raise the implement.

7. Clean the tools.

Fig. 49

Fig. 50

Содержание Catros 3001



























































































Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 3001, Руководство оператора

Результаты поиска

Содержание Catros 3001

Отзывы:

Бренды по названию

Популярные бренды