Amazone Catros 12003-2TS, Руководство оператора

Страница: 93 / 114

Cleaning, maintenance and repairs
12.4 Axle (running gear / support wheel) and brake
For optimum brake performance with a minimum of wear, we recom-
mend that the brakes on the tractor are balanced with those on the
implement. After the service braking system has been run in for a
suitable period, arrange for the brakes to be balanced by a specialist
workshop.
To avoid problems with the brakes, adjust all vehicles in accordance
with EC Guideline 71/320 EEC.
WARNING
•
Repair and adjustment work on the service braking system
should only be carried out by trained specialist personnel.
•
Special care is required for welding, torch cutting and drill-
ing work in the vicinity of brake lines.
•
Always carry out a braking test after any adjusting or repair
work on the braking system
General visual inspection
WARNING
Carry out a general visual check of the brake system. Observe
and check the following criteria:
•
Pipe lines, hose lines and coupler heads must not be exter-
nally damaged or rusted.
•
Hinges, e.g. on fork heads, must be properly secured, easy
to move, and not worn out.
•
Ropes and cables:
ο
must be properly run
ο
may not have any visible cracks
ο
may not be knotted
•
Check the piston stroke on the brake cylinders, and adjust
as necessary.
•
The air reservoir may not:
ο
move around in the tensioning belts
ο
be damaged
ο
show any outward signs of corrosion damage
Catros BAG0110.10 10.19 93