Amazone Catros 12003-2TS, Руководство оператора

Страница: 76 / 114

Adjustments
8.1.1 Mechanical working depth adjustment
The working depth is adjusted in headlands posi-
tion!
1. Move the implement into headlands posi-
tion.
2. Secure the implement against unintentional-
ly rolling away.
3. Set the same working depth for all of the
disc segments
3.1 Remove the locking pin (1) with the
linch pin.
3.2 Beginning from the bottom, swivel the
spacer elements (2) around the piston
rod of the hydraulic cylinder.
3.3 Secure all of the spacer elements
(those required for adjustment and
those that are free) with the locking pin
from the bottom (1) and lock with a
linch pin.
•
Increasing the working depth: decrease the
number of spacer elements on the piston
rod.
•
Reducing the working depth: increase the
number of spacer elements on the piston
rod.
8.1.2 Hydraulic working depth adjustment
The working depth is adjusted hydraulically in
working position using the
green 3 /4 tractor con-
trol unit.
The scale provides orientation for the set working
depth.
(1) Working depth setting range
(2) Headlands position
If a uniform working depth cannot be
adjusted, see page 84.
76 Catros BAG0110.10 10.19