Amazone Catros 12003-2TS, Руководство оператора

Страница: 105 / 114

Cleaning, maintenance and repairs
12.10.4 Installation and removal of hydraulic hose lines
When installing and removing hydraulic hose lines, always observe
the following information:
•
Only use AMAZONE original hydraulic hose lines.
•
Ensure cleanliness.
•
You must always install the hydraulic lines so that, in all states of
operation:
ο
there is no tension, apart from the hose's own weight
ο
there is no possibility of pulling or kinking on short lengths
ο
outer mechanical influences on the hydraulic hose lines are
avoided
use appropriate arrangements and fixing to prevent any
rubbing of the hoses on components or on each other. If
necessary, secure hydraulic hose lines using protective co-
vers. Cover sharp-edged components.
ο
the approved bending radii may not be exceeded
•
When connecting a hydraulic hose line to moving parts, the hose
length must be appropriate so that the smallest approved bend-
ing radius is not undershot over the whole area of movement
and/or the hydraulic hose line is not over-stressed.
•
Attach the hydraulic hose lines to the specified attachment
points. Avoid hose holders which impair the natural movement
and length changes of the hose.
•
It is prohibited to paint hydraulic hose lines!
Catros BAG0110.10 10.19 105