Amazone AMATRON 3, Руководство по эксплуатации

Страница: 102 / 136

1. Select "GPS switch" > > "Track line pattern" .
2. Select the desired track line pattern and confirm.
12.2 Defining the track line spacing
The track line spacing is automatically defined as one
working width. If the tracks are precisely followed, com-
plete coverage is ensured. If overlapping of the rows is
desired, the track line spacing can be changed manually.
NOTE
If the track line spacing is reduced for desired overlap,
the overlap tolerance must be adapted accordingly,
see page 107.
1. Select "GPS switch" > > "Track line spacing" .
2. Enter the distance for the desired track line spacing
and confirm.
12.3 Creating beds
To create beds, certain track lines can be highlighted.
The highlighted track lines show the row in which the
worked area must be travelled to create a bed of the de-
sired size. The entered number indicates the rhythm in
which the track lines must be followed. If e.g. a 2 is en-
tered, every second track line must be followed. In this
way, one track line is always left out and therefore cre-
ates beds of one working width.
009345
009346
K | Using the GPS switch| Using track lines
MG5560-EN-II
| B.1 | 2016.07 100