Amazone AMAPAD, Руководство по эксплуатации

Страница: 69 / 237

1. Select "Setup menu" > "System" > "ISOBUS" >
"TC" .
2. Tap on "Manual control mode for part-width section
control" .
Possible settings:
ECU-controlled: if automatic part-width section
control is disabled, the part-width sections can no
longer be controlled using the virtual part-width
section switch.
Console-controlled: if automatic part-width section
control is disabled, the part-width sections can still be
controlled using the virtual part-width section switch.
3. Select the control mode.
3.6.3 AUX-N function configuration
AUX-N functions are used to control the functions of the
AMAPAD and the connected implement using a quick
access. The quick access buttons are shown on the
function bar in a miniature view. An additional button can
be shown on the dashboard.
REQUIREMENTS
UT number of the AMAPAD is 1; see page 63
Enabling miniature views for AUX input
A maximum of 9 buttons can be shown in a miniature
view for quick access. A total of 3 miniature views can
be enabled. To facilitate the assignment, the symbols for
the miniature views are marked in colour.
006949
006956
F | Configuring the AMAPAD | Entering the system settings
MG5574-
EN
-II | B.1 | 25.10.2016 67