Amazfit GTS 2, Руководство пользователя

Страница: 5 / 26

On your phone, start and log in to the Zepp app and scan the QR code displayed on the watch to pair your phone
with the watch.
Pairing with a new phone:
1.
On your old phone, start the Zepp app and synchronize data with the watch.
2. On your old phone, go to the information page of the watch, tap Unpair at the bottom of the page, and unpair
the old phone from the watch.
3. Restore the factory settings of the watch, and restart the watch. After the watch is restarted, pair the watch
with your new phone according to the initial pairing procedure.
Updating the system of your watch
Keep the watch connected with your phone, start the Zepp app, go to Profile > Amazfit GTS 2, and tap System
update to view or update the system of your watch.
It is recommended that you tap Update Immediately when your watch receives a system update message.
Control center
On the watch face page, swipe down to go to the control center for the following system functions: Flashlight,
Brightness adjustment, DND, Battery saver mode, Screen locked, Find mobile, Volume setting, Theater mode, and
Keep Watch Awake.
Time System
Keep the watch connected with your phone. During data synchronization, the watch automatically follows the
system time and time format of your phone, and displays the time in a 12 h or 24 h format.
Units
Keep the watch connected with your phone, start the Zepp app, and go to Profile > Settings. Here, you can set the
unit of measurement for distance and weight. During data synchronization, the watch automatically follows the
settings in the app.